Feider Machines AIRWIN1000W, Instruction Manual

Page: 26 / 32

26
Steel ball
In the case that the paint cannot be sprayed normally, remove the suction tube and move the steel
ball with a screwdriver.
1. First take out the down suction valve clamp by hand (arrow 1)
2. Take the suction tube assembly out of the down suction valve by hand (arrow 2)
3. Tilt the machine 20 degrees and use a screwdriver to move the steel ball. (Arrow 3)
4. After confirming that the steel ball is loose, reassemble all parts according to the reverse
program: fully insert the suction tube (arrow 2) into the lower suction valve by hand