10
FY6800 Series User
’s Manual
It is used to control the output of the CH1 channel and can be
switched to the CH1 parameter setting interface in any
interface.
—
Press this button, the CH2 light will turn on, and the CH2
output will turn on. At this point, the [CH2] connector outputs
the signal in the current configuration.
—
Press this button again, the indicator light goes off, and at
this point, the CH2 output is turned off.
9
CH2 channel
output
connector
BNC connector, nominal output impedance 50Ω.
When channel CH2 is on (the CH2 button indicator lights up), the connector
outputs the waveform in the current configuration of CH2.
10
AC coupling
measuring
terminal
BNC connector, input impedance 100Ω. For inputting signal of meter or
counter.
