Feel Good mr.steam Basic Butler Installation, Operation & Maintenance Manual Download Page 4

mr

.

steam

®

  

Installation & Operating Instructions

_________________________________________________________________

3

REA D  ME  F IR S T !

 

As you follow these instruc -

tions, you will notice warning and caution 
symbols. This blocked information is impor -
tant for the safe and efficient installation 
and operation of this generator. These are 
types of potential hazards that may occur 
during installation and operation:

 

Indicates a potentially   

hazardous situation, which, if not avoided, 
could result in death or serious injury.

 

Indicates a potentially   

hazardous situation, which, if not avoided 
may result in minor or moderate injury or 
product damage.

IMP O RTA N T NO TE :

  This highlights   

information that is especially relevant to   
a problem-free installation.

All information in these instructions is 
based on the latest product information 
available at the time of publication.   
Sussman-Automatic Corporation reserves 
the right to make changes at any time   
without notice.

Table of Contents:

Important Safety Instructions  ..............................

3

Before Installing   ..................................................

5

Dimensional Information  ....................................

6

Installations  ......................................................

7-9

iTempo Operating Instructions  ................... 10-11

iTempoPlus Operating Instructions  ............. 12-15

Care and Maintenance  .....................................

16

Warranty  ...........................................................

16

W AR N ING

!

W AR N ING

!

CA UTI ON

!

Summary of Contents for mr.steam Basic Butler



































Reviews: