mr
.
steam
®
AROMAFLO Operation & Installation
__________________________________________________________________
8
START-UP
Initial Priming of the Pump
1. Insure Mr.Steam scent container is full.
2. Insert the short injector hose onto the tip of the injec-
tor (see Fig. 5).
3. Unscrew the pressure end nut from the pump head and
remove the pressure hose from the pressure valve (see
Fig.3).
4. Insert the open end of the injection hose onto the
pressure valve (see Fig. 5).
5. Draw liquid from the injector slowly and evenly.
Continue until the injector is full of liquid.
6. If you have drawn up the injector completely and no
liquid is in the injector, remove the injector hose from
the pressure valve.
7. Drain injector. Repeat steps until the injector is filled.
Figure 5
Pressure Valve
Injector Hose
Filling the Pressure Hose
1. Insure the AromaFlo Pump is primed and
the scent container is full.
2. Locate the Push-button at the rear of the
metering pump (see Fig. 6). Depress this
push-button to start metering pump.
3. Continue to depress push-button until the
pressure hose is filled with liquid.
IMPORTANT NOTE:
Push button to be used
only for initial filling of the pressure hose.
Figure 6
Push Button
AromaFlo
Metering Pump
Injector
Tip
