mr
.
steam
®
AROMAFLO Operation & Installation
__________________________________________________________________
4
Installing the Pressure Hose to Atomizing Nozzle
1. Unscrew the nut from the atomizing nozzle and insert the pressure
hose through the nut.
2. Firmly push the pressure hose onto the atomizing nozzle (see pg 5).
3. Screw on the nut
IMPORTANT NOTE:
HAND-TIGHTEN ONLY
Installation of Pressure Hose to AromaFlo Pump.
1. Unscrew the pressure end nut from the pump head and remove the
shipping hose and the pressure end nut.
2. Insert the pressure hose through the hole of the pressure end nut
and firmly push the pressure hose onto the pressure valve.
3. Screw the pressure end nut onto the pressure valve and tighten the
nut by HAND only.
Installation of Suction Hose in Scent Container
1. Locate the “container cover” in the AromaFlo box.
2. Unscrew the cover from the Mr.Steam scent container and discard.
3. Insert the suction hose with the open end from below through
the hole in the container cover (see Fig. 3).
4. Insert the filter into the scent container so that the filter rests
on the bottom.
5. Screw the cover onto the scent container.
NOTE:
Limit height difference between metering pump
and scent container to 3 feet.
Installation of Suction Hose to AromaFlo Pump
1. Unscrew the suction end nut from the pump head and remove
short end of shipping hose (see Fig. 3)(discard shipping hose,
keep pressure end nut).
2. Remove suction end nut from the shipping hose.
3. Insert the open end of the suction hose through the hole of
the suction end nut.
4. Firmly push the hose onto the cone of the suction valve at
the pump head.
5. Screw the suction end nut to the suction valve.
IMPORTANT NOTE:
HAND-TIGHTEN ONLY.
Figure 4
Open End
Container Cover
Suction Hose
Filter
C
on
ta
in
er
H
ei
gh
t
Pressure End Nut
Pressure Valve
Pump Head
Suction Valve
Suction End Nut
Figure 3
