- 11 -
Glass Shelves Installation
SHORTER GLASS TOP SHELF
LONGER GLASS BOTTOM SHELF
SHORTER TOP SHELF BRACKETS
LONGER BOTTOM SHELF BRACKETS
SHELF BRACKET FRONT TAB
SHELF SUPPORT
SHELF SUPPORT
SHELF SUPPORT OR FRONT LIGHT
WITH LONG CORD WHEN SUPPLIED
WITH SHELF LIGHT OPTION.
SHELF SUPPORT OR FRONT LIGHT
WITH SHORT CORD WHEN SUPPLIED
WITH SHELF LIGHT OPTION.
CORD RETAINER CLIP ON THIS SIDE
WHEN ORDERED WITH SHELF LIGHT OPTION
GLASS SHELF RETAINER CLIPS.
MUST INSTALL TO GLASS
GLASS SHELF RETAINER
CLIP LOCATED IN FAR
CORNER OF GLASS SHELF.
(FIELD INSTALLED TO GLASS
BOTTOM)
TOP VIEW
CLEAR PRODUCT STOP
CLEAR PRODUCT STOP
CLEAR PRODUCT STOP
(FIELD INSTALLED TO
GLASS FRONT LIP)
GLASS SHELF RETAINER CLIP
1.
For first time installation attach (2) glass shelf retainer to each glass shelf. Remove backing from tape
located on flat side of glass shelf retainer. Position the glass shelf retainer in the (2) far corners of glass
as shown in detail drawing above. Repeat for each glass shelf.
NOTE: Clean area of glass where glass shelf holder is to be located with isopropyl alcohol and let
air dry before installing shelf glass holder.
2.
For first time installation attach (1) clear glass product stop to each glass shelf as shown in detail above.
Align the clear product stop edge with the edge of the glass and push the “U” portion of the glass
product stop on to glass lip across the entire front of glass. Repeat for each glass shelf.
3. Install the shelf brackets into shelf standard as described in Step (1) of “Metal Shelves Installation” of
this manual.
4. Place front of glass shelf onto front shelf support. (on to front shelf light for models with shelf lights.)
5. Set the rear of the glass shelf onto the rear shelf support so that the glass shelf retainers straddles the
rear shelf support.
6. Repeat steps 2 & 3 for each tier.