Viper S2 for the Rear Deck of the 2013 Ford Interceptor and Taurus Sedan
3
Models 350701-06 (Single Head) and 350701-07 (Dual Head)
Trial-Fitting the Light and Bracket Assembly
To trial-fit the light to the bracket assembly:
1.
See Figure 2. Feed the #6 thread-forming screw (supplied with the Viper S2) through the slot in the
bracket, through the #6 lock washer (supplied with the Viper S2) into the mounting hole on the side of the
Viper S2. Leave the assembly loose.
Figure 2 Rear deck bracket and riser assembly (350701-06 shown)
#6 THREAD-FORMER (2)
(SUPPLIED WITH LIGHT)
#6 LOCKWASHER (2)
(SUPPLIED WITH LIGHT)
290A7214
VIPER S2
2.
Repeat step 1 on the other side of the light. Tighten the assembly enough so that the Viper S2 can be moved
back and forth with little effort, but cannot move on its own.
3.
See Figure 3. Place the angled edges of the light and bracket assembly against the angled surfaces of the
rear deck package tray. If the bracket touches the rear window before the angled surfaces meet, then the
bracket must be moved toward the center of the vehicle.
Figure 3 Rear deck bracket and riser assembly (350701-06 shown)
290A7215
REAR DECK BRACKET ASSY.
#10 THREAD FORMER (2)
#10 THREAD FORMER (2)
REAR DECK
ANGLED EDGES,
SURFACES
