7
Installing the Viper EXT Series LED Light Heads
than the LED color will greatly reduce the light output and reduce the ef-
fectiveness of the light for emergency signaling purposes.
Failure to follow this warning may result in personal injury or death to you
or others.
SET ONLY ONE CONTROLLER
When putting together systems of
V
IPER
EXT
light heads, ensure there is
only one controller light head. If more than one light head in a system is a
controller, the follower light heads will malfunction.
4OCONVERTALIGHTHEADFROMCONTROLLERTOFOLLOWER
!PPLY6DC"!4 TOTHELIGHTHEADSREDWIRE
#ONNECTTHEBLACKWIRETONEGATIVEGROUNDPOWER'.$
(OLDTHEWHITEPATTERNSELECTIONWIRETO6DC"!4 UNTILTHELIGHT
HEADmASHES7AITONESECONDANDTHENREMOVETHEWHITEWIREFROM"!4
4HELIGHTGOESTOFULLPOWERSTEADYBURNFORABOUTTWOSECONDSANDTHENTO
LOWPOWERSTEADYBURN
#OMPLETETHECONVERSIONBYCONNECTINGTHELIGHTHEADTOACONTROLLERLIGHT
head as shown in
Figure 3
ONPAGE
9OUCANCONVERTAFOLLOWERBACKTOACONTROLLERBYREPEATINGSTEPSTHOUGH
Mounting the
V
IPER
EXT
to a Vehicle from the Front
ROOF SUPPORT STRUCTURE
There is a roof support member that spans the distance between the driver’s
and passenger’s side. DO NOT DRILL THROUGH THIS MEMBER! Ad-
just any hole locations until the holes can be drilled without going through
this support.
Failure to follow this warning will weaken the roof of the vehicle and may
lead to an increased chance of bodily injury or death in a roll over accident.
LOCATING OPERATOR CONTROLS
Locate the light system controls so the VEHICLE and CONTROLS can be
operates safely under all driving conditions.
Failure to heed this warning could result in driver distraction or driver er-
ror while operating the vehicle.