6
Installation Instructions
Model 350WBX Vibratone
®
Horn
• File these instructions in a safe place and refer to them when
maintaining and/or reinstalling the device.
Failure to follow all safety precautions and instructions may result
in property damage, serious injury, or death.
EXPLOSION HAZARD—Substitution of components may
impair suitability for Class I, Division 2, Groups A, B, C and D;
Class II, Division 2; Groups F & G; and Class III.
EXPLOSION HAZARD—Do not disconnect equipment unless
power has been switched off or unless the area is known to be
non-hazardous.
Unpacking the Product
After unpacking the product, examine it for damage that may
have occurred in transit. If the beacon has been damaged, do not
attempt to install or operate it. File a claim immediately with
the carrier, stating the extent of the damage. Carefully check all
envelopes, shipping labels, and tags before removing or discarding
them. Disposal of all shipping materials must be carried out in
accordance with national and local codes and standards. If any
parts are missing, please call Federal Signal Customer Support at
708-534-4756 or 877 289-3246.
Product Specifications
This equipment is suitable for use in Class I, Division 2, Groups A,
B, C and D; Class II, Division 2, Groups F & G; Class III or non-
hazardous locations only.
Table 1 Audibility and Electrical Ratings
Voltage
Current (Amperes) Hz
dB* dB**
120
0.18/0.22
50/60 100
94
230-240 0.09
50/60 100
94
*Measured on-axis at 10 ft/3 m in an anechoic chamber.
** Underwriters Laboratories omnidirectional sound pressure
level rating at 10 feet.
