2562451C
REV. C 310
Printed in U.S.A.
INSTRUCTIONS
FOR
QUADRAFLARE™ 9 X 7 LED SCENE LIGHT
QL97LEDSCENE
SAFETY MESSAGE TO INSTALLERS
People’s lives depend on your safe installation of our products. It is
important to read, understand and follow all instructions shipped
with the products. In addition, listed below are some other important
safety instructions and precautions you should follow:
•
To properly install this light, you must have a good understand
ing of automotive electrical procedures and systems, along with
proficiency in the installation and use of safety warning equip
ment.
•
DO NOT install equipment or route wiring or cord in the deploy
ment path of an airbag.
•
If a vehicle seat is temporarily removed, verify with the vehicle
manufacturer if the seat needs to be recalibrated for proper air
bag deployment.
•
When drilling into a vehicle structure, be sure that both sides of
the surface are clear of anything that could be damaged.
•
Locate light control so the VEHICLE and CONTROL can be oper
ated safely under all driving conditions.
•
Do not attempt to activate or deactivate light control while driv
ing in a hazardous situation.
•
This product contains high intensity LED devices. To prevent eye
damage, DO NOT stare into the light beam at close range.
•
You should frequently inspect the light to ensure that it is oper
ating properly and that it is securely attached to the vehicle.
•
After testing is complete, provide a copy of these instructions to
the instructional staff and all operating personnel.
•
File these instructions in a safe place and refer to them when
maintaining and/or reinstalling the product.
Failure to follow all safety precautions and instructions may result in
property damage, serious injury, or death to you or others.
A. OVERVIEW
The Federal Signal QuadraFlare LED Scene Light is a self-contained, high
intensity LED light designed for mounting to the exterior of a vehicle. Model
QL97LEDSCENE QuadraFlare LED scene lights are designed for operation on 12 Vdc.
