19
Installation and Maintenance Instructions
Selectone Model PS600
5.
Use
BAT FAIL
(1 Form C dry contact) terminal to report
LOW or NO battery condition. Battery fail is indicated in
approximately 20 seconds. The battery trouble relay is 2 A
at 120 Vac/28 Vdc.
Getting Repair Service or Technical Assistance
Products returned for repair require a Return Authorization form
from your local distributor or from Federal Signal. To obtain
repair service or technical assistance from Federal Signal, call
708-534-4756 or 877-289-3246. For instruction manuals and
information on related products, visit:
http://www.federalsignal-indust.com
Safety Message to Maintenance Personnel
Listed below are some important safety instructions and precautions
you should follow:
• Read and understand all instructions before operating this
system.
• Any maintenance to the system must be done with power
turned off.
• Any maintenance to the system must be performed by a trained
electrician who is thoroughly familiar with all applicable
national and local codes in the country of use.
• Do not connect this unit to the system when power is on.
• Never alter the unit in any manner. Safety may be compromised
if additional openings or other alterations are made to the
internal components or housing.
• The nameplate should NOT be obscured, as it contains
cautionary and/or other information of importance to
maintenance personnel. Ensure the nameplate remains readable
if the housing exterior is painted.
