12
IMPAXX
®
IPX600 Series LED Light Heads
Federal Signal
www.fedsig.com
Installing the IPX600 LED Light Heads
Installing the IPX600 LED Light Heads
LIGHT HAZARD: To be an effective warning device, an
emergency warning system produces bright light that can be
hazardous to your eyesight when viewed at a close range. Do
not stare directly into this lighting product at a close range, or
permanent damage to your eyesight may occur.
Before installing the IPX600, read all instructions and plan all
wiring and cable routing. To secure and protect the wiring,
use grommets, wire ties, looms, and cable mounts (installer-
supplied) as needed.
The steps in installing the lights are as follows:
1.
Optionally set a light head to control the flash patterns
of one or more light heads in the IPX600 system. See
"Converting a Light Head from Controller to Follower and
Vice Versa" on page 13.
2.
For light heads with more than one color, one of which is
white, select whether the white LEDs flash with the pattern
and/or the function of the OPTION wire. This step is optional.
See "Configuring Multicolor Light Heads" on page 15.
3.
Mount the IPX600 system to the vehicle. See "Mounting
the IPX600 Light Head to a Vehicle" on page 18 or the
instructions for the mounting bracket included with the light
head.
4.
Wire the IPX600 system to the vehicle. See "Wiring the
IPX600 Light Head in the Vehicle" on page 21.
5.
Choose a flash pattern for the controller light head. See
"Selecting a Flash Pattern" on page 21.
