background image

6

  

  

Safety Messages

Informer15 Speaker (Model I-IP15)

this product in accordance with national, state and any other electrical codes having 

jurisdiction. Perform all work under the direction of the installation or service crew 

safety foreman.

•  Read and understand all instructions before installing, operating, or servicing this 

equipment.

•  This product shall be mounted at the minimum hearing distance of ten feet in 

accordance with FEMA guidelines limiting sound level exposure to 123 dBc 

maximum sound level.

•  All effective warning sounds may, in certain circumstances, cause permanent hearing 

loss. Take appropriate precautions such as wearing hearing protection. Maximum 

sound level exposure limits specified in OSHA 29 CFR 1910 should not be exceeded.

•  These devices are intended for permanent installation and operation in accordance 

with Title 46, Code of Federal Regulations, Parts 110–113, or Title 33, Code of 

Federal Regulations, Part 183, Sub-part I, Section 183.410, and the applicable 

requirements of the American Boat and Yacht Council, Inc., and/or ANSI/NFPA 302, 

“Fire Protection Standard for Pleasure and Commercial Motor Craft.”

•  For optimum sound distribution do not install this speaker where objects would block 

any portion of the front of the Informer15 Speaker.

•  Do not paint the Informer15 Speaker. No finish or coating is required. Paint may 

obstruct the sound output, reducing the effectiveness of the horn. 

•  Establish a procedure to routinely check the signal system for proper activation and 

operation.

•  Any maintenance to the unit MUST be performed by a trained electrician in 

accordance with NEC Guidelines and local codes or a Federal Signal certified 

Service Provider.

•  Never alter the unit in any manner.
•  The nameplate should NOT be obscured, as it contains cautionary and/or other 

information of importance to maintenance personnel.

•  After installation and completion of initial system test, provide a copy of these 

instructions to all personnel responsible for operation, periodic testing, and 

maintenance of the equipment.

•  File these instructions in a safe place and refer to them when maintaining and/or 

reinstalling the device.

Failure to follow all safety precautions and instructions may result in property damage, 

serious injury, or death.

Summary of Contents for Informer15 I-IP15





















Reviews: