Federal Signal Corporation Informer15 I-IP15 Installation, Operation And Service Manual Download Page 18

18

  

  

Maintenance

Informer15 Speaker (Model I-IP15)

Maintenance

Failure to follow all safety precautions and instructions may result in property damage, 

serious injury, or death to you or others.
•  Read and understand all instructions before performing maintenance on this unit.
•  To reduce the risk of electrical shock or ignition of hazardous atmospheres, do not 

perform maintenance or service on this unit when circuits are energized.

•  Periodic checks should be made to ensure that effectiveness of this device has not 

been reduced because speaker has become clogged with a foreign substance or 

because objects have been placed in front of the speaker.

•  Any maintenance on this unit MUST be performed by a licensed electrician in 

accordance with NEC guidelines and local codes.

•  Never alter these units in any manner. Note, additional openings or alterations made 

to the Informer15 Speaker may jeopardize the safety of the hazardous location.

•  The nameplates, which contain cautionary or other information of importance to 

maintenance personnel, should not be obscured if the exterior of device is painted.

•  Periodically inspect this device to verify that there are no foreign substances in, or in 

front of the speaker, which will reduce its notification effectiveness.

•  Periodic evaluation on the performance of the unit should be conduct at regular 

intervals.

•  In the event a volume adjustment or other repair is required, be sure to refer to the 

Safety Message before proceeding.

Unauthorized repair/servicing of the unit may result in degradation of 

performance and/or safety, resulting in property damage, serious injury, or 

death to you or others. If a malfunctioning unit is encountered, do not attempt 

any field repair/retrofit of parts.

Ordering Replacement Parts

To order replacement parts, call Customer Care. See Getting Service.

Table 9 Replacement Parts

Description Part Number
Voice Coil

K8590246A

Getting Service

If you are experiencing any difficulties, contact Federal Signal Customer Care at:  

800-548-7229 or 708-534-3400 extension 5822 or Technical Support at: 800-524-3021 

or 708-534-3400 extension 7329 or through e-mail at: [email protected]. For 

instruction manuals and information on related products, visit: http://www.fedsig.com/

Summary of Contents for Informer15 I-IP15





















Reviews: