34
Installing the Kit
One-Way to Two-Way Kit for DBFCB
Federal Signal www.fedsig.com
48. Install the radio bracket (item 40) using the 3/8-inch nuts (item 24).
Figure 46 Radio bracket
49. Connect the antenna wire (item 4) to the radio. Ensure that it is tight.
Figure 47 Antenna wire
50. Connect the radio power cable (item 3) and radio interface cable (item 2) to the radio.
NOTE: The radio interface cable plug is centered in the radio socket.
51. Install the radio (item 39) into the radio bracket. To secure the radio in the bracket,
use items 32-33, and the pre-existing thumb screw that comes with the radio.
NOTE: The screw is used on the door side to allow the door to shut.
52. Connect the antenna cable (item 4) to the antenna lightning protection. Ensure that it
is tight.
