background image

Warranty

 – Seller warrants all goods for five years on parts and 2-1/2 years 

on labor, under the following conditions and exceptions: Seller warrants that 
all goods of Seller's manufacture will conform to any descriptions thereof for 
specifications which are expressly made a part of this sales contract and at the 
time of sale by Seller such goods shall be commercially free from defects in 
material or workmanship. Seller reserves the right at the Seller’s discretion to 
“Repair and Return” or “Replace” any item deemed defective during the war-
ranty period. This warranty does not cover travel expenses, the cost of special-
ized equipment for gaining access to the product, or labor charges for removal 
and reinstallation of the product. This warranty shall be ineffective and shall not 
apply to goods that have been subjected to misuse, neglect, accident, damage, 
improper maintenance, or to goods altered or repaired by anyone other than 
Seller or its authorized representative, or if five years have elapsed from the 
date of shipment of the goods by Seller with the following exceptions: lamps 
and strobe tubes are not covered under this warranty. Outdoor warning sirens 
and controllers manufactured by Federal Warning Systems are warranteed for 
two years on parts and one year on labor. No agent, employee, representative 
or distributor of Seller has any authority to bind the Seller to any representation, 
affirmation, or warranty concerning the goods and any such representation, af-
firmation or warranty shall not be deemed to have become a part of the basics 
of the sales contract and shall be unenforceable. THE FOREGOING WAR-
RANTIES ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES 
OR MERCHANTABILITY, FITNESS FOR PURPOSE AND OF ANY OTHER 
TYPE, WHETHER EXPRESS OR IMPLIED. These warranties shall not apply 
unless Seller shall be given reasonable opportunity to investigate all claims for 
allegedly defective goods. Upon Seller's instruction a sample only of allegedly 
defective goods shall be returned to Seller for its inspection and approval. 
The basis of all claims for alleged defects in the goods not discoverable upon 
reasonable inspection thereof pursuant to paragraph 8 hereof must be fully 
explained in writing and received by Seller within thirty days after Buyer learns 
of the defect or such claim shall be deemed waived.

Industrial Systems

2645 Federal Signal Drive • University Park, IL 60484-3167
Tel: 708-534-4756 • Fax: 708-534-4852
Email: [email protected] • www.federalsignal-indust.com

Summary of Contents for 400 Series

















Reviews: