Installation: Ceiling Mount
Model 400 Series Lights
13
3.
Install the nylon grommet in the center hole in the bottom of
the lower housing.
4
. Route the light supply wires through the grommet that was
installed in step 3.
5.
Attach the wall/ceiling mounting bracket to the lower
housing using two 1/4-20 x 1/2" hex head machine screws
and KEPS nuts (supplied).
6.
Apply the self-adhesive cover over the holes on the side of
the main frame casting.
7.
Reassemble the light following steps 1 and 2 in reverse
order.
8.
Install the light on the ceiling following the Flat Surface
Mount instructions on page 7 or the Electrical Box Mount
instructions on page 10.
