febromed get up, Instruction Manual

Page: 10 / 24

10
F-049 GB Rev00 02.05.2019 get up® Instruction Manual
9 Function
9.1 Swiveling the get up®
WARNING
Property Damage Due to Collision
Objects which are located within the pivot
radius of the get up® can be permanently
damaged by collisions.

Make sure that there are no objects located
within the pivot radius of the get up®.

Collisions with fixed objects, furniture and
walls can be prevented by installing a
turning radius limitation.
1. Grab the triangle handle with one hand.
2. Tighten the strap by pulling the triangle
handle slightly downwards.
3. With the other hand, pull the rope downwards
and keep it pulled.

The lock is now released and the get up®
can be swiveled.
4. Swivel the get up® to the desired position.
5. Loosen the pull rope.
6. Swivel the get up® a few degrees further in
any direction.

The lock audibly engages, the get up® can
now be used.
7. Make sure that the lock has engaged by
trying to swivel the get up®.
Abb.2: Swiveling the get up®
9.2 Altering the Position of the Triangle
Handle
To achieve an optimum positioning of the
triangle handle, the get up® has one or two
mounting rails with several mount points,
depending on the model.
1. Grab the handle with your hand.
2. Heben Sie die Haltegriffaufhängung an, bis
sie den Schwenkarm des get up® berührt.
3. Move the handle mounting to the desired
position.
4. Lower the handle mounting until it snaps into
a mount point.

The triangle handle is now located in the
desired location and the get up® can be
used.
5. Make sure that the grab handle suspension is
engaged in the suspension point.
1
2
3
4
5
6