15
MSR128LUS/MSR128LUV USERS MANUAL EM-7375 Rev.2
4.2
NODE SETTING
The node number is described in hexadecimal. Be sure to match the node number specified here and selected by
the device.
The node number and device type information is used when assigning specific channel per pen. Be sure to mark
‘Enable’ so that each device (node) information is correctly indicated and set in Pen setting and Alarm setting.
Figure 4.2: Node setting.
1. Enable the node number of the connected device.
2. Pull down Device menu and select an I/O type.
Caution !
1. Be sure to ‘Disable’ all unused nodes. Be sure to ‘Disable’ these nodes if they are used in Pen Setting.
2. Depending upon the number of nodes, the MSR128LU may not be able to record in 0.5-sec. storing cycle.