38
MAN-147-0018-A
8. A
PPENDIX
1:
S
YSTEMS AND FEATURES REQUIRING
IDT
(PC)
Historically, setup of Multilog2 loggers was undertaken using the IDT (PC/Windows) tool.
Setup of most Multilog2 logger functions for Pressure and Flow channels and the most
commonly used alarm types has recently been introduced to the IDT (mobile app) tool.
However, the IDT (mobile app) does not yet support some situations.
The following logger types require IDT (PC) for their entire setup:
•
WL/*/*/* Multilog2 logger device (models for use in WITS systems).
Refer to the IDT (PC) user-guide for most settings. Additional information for
WL series models can be found in the following user-guide: MAN-147-0017
(Supplement for models supporting WITS protocol).
•
RDL6*LF/* Multilog (original) logger devices.
The following logger/sensor combinations require IDT (PC) for setup:
•
Multilog2 using a SonicSens2 sensor.
•
Multilog2 using a SonicSens3 sensor.
•
Multilog2 using a RS485/MODBUS sensor.
•
Multilog2 using an SDI-12 sensor.
•
Multilog2 using a Hydrophone or LNS (Leak-Noise Sensor).
•
Multilog2 using a GPS Satellite (for either location or Time-sync).
•
The following logger features require IDT (PC) for setup:
•
Update of firmware of logger or attached sensors.
•
Fast logging features (Pressure Transient, Enhanced Network logging).
•
Flow Rate (when calculated from flow velocity, channel depth, channel
geometry).
•
Profile Alarm.
•
Tamper Alarm.
