FCI ST100A Series, Installation, Operation And Maintenance Manual

Page: 75 / 170

ST100A Series Flow Meter OPERATION
Fluid Components International LLC 67
Command 46: Trim DAC Gain – Measured Current Chan #1 (in mA)
Byte Format Description
Request Data Bytes 0–3 Float Ext. Measured Current Ch. #1 Level (20 mA GainDAC)
Response Data Bytes
1
0–3 Float Actual Measured Current Ch. #1 Level (20 mA GainDAC)
Response Codes See Table 17 , page 74 , for response code list.
Note: 1. The value returned in the response data bytes reflects the rounded or truncated value actually used by the device.
Note: 1. The value returned in the response data bytes reflects the value actually used by the device.
Command 50: Read Dynamic Variable Assignments
Byte Format Description
Request Data Bytes None
Response Data Bytes 0 Unsigned-8 Device Variable assigned to the primary variable.
1–3 — 250 (Unused)
Response Codes See Table 17 for response code list.
Command 51: Write Dynamic Variable Assignments
Byte Format Description
Request Data Bytes 0 Unsigned-8 Device Variable assigned to the primary variable.
Response Data Bytes
1
0 Unsigned-8 Device Variable assigned to the primary variable.
1–3 — 250 (Unused)
Response Codes See Table 17 for response code list.