FCI Electronics
Manual Part No. 415988-001
Issued: (03/12/99)
Page 4 of 18
Rev. 05/18/06 EC V06-0481
Revision C
INTRODUCTION
Hand Tool Function
The HT-0095 is a manually operated hand tool designed for crimping loose piece (individual)
Mini PV™ terminals to various sizes of wire.
Physical Description
The major components, which make up the HT-0095, are identified in Figure 1. These components
include a frame, lever, tooling and tooling holders, and terminal holding pins. The heart of the hand
tool is the tooling. The tooling performs the crimping operation and is divided into top and bottom
component groups. The top group consists of those parts, which remain stationary with the frame. The
bottom group contains those parts, which move with the lever. The HT-0095 is equipped with tooling
for crimping two different ranges of wire sizes. These are identified as "A" and "B" on a plate affixed to
the hand tool frame. The "A" side tooling is for crimping terminals to wire sizes ranging from 28-32
AWG. The "B" side tooling is used for wire sizes from 22-26 AWG.
Figure 1
PDM: Rev:C Released .
STATUS: Printed: Feb 09, 2009
