<>: selects response condition from: Day Alarm, Night Alarm,
Action, Supervisory, Tornado.
1: Scrolls through coded pattern selections: MT60, MT120,
Temporal, CA Code, Coded 4s.
Enter label using keypad and shift key. Press button until desired
letter appears. Use BKSP/EDIT to capitalize.
Use arrow keys <> to shift message from left to right or vice versa.
NOTE: if this menu is opened from the Global Config Menu,
System ID selection (Menu 5 option 4), SYSTM ID is displayed;
otherwise L,AAA LOCTN as shown above.
1: Toggles Multiple Trouble Acknowledge ON/OFF
2: Toggles Alarm/Trouble Reminder ON/OFF
3: Scrolls Walk Test Timeout (30m, 60m, 90m)
4: Toggles RS232 Supervision Message ON/OFF
Main
Config
Global
Codes
[L,AAA]
FLR1 Lobby
Config
[LOCTN]
7,9 chng 1st ^
chng 2nd
[CODED] 1:Set Day Alarm
(MT60)
Config
[PATTS]
to select condition
Main
Config
Global
System ID
or
Main
Config
Inputs (or Outputs)
Select
Location
NOTE:
Some menus may appear in different contexts, but with slightly different behavior. For example, the “Select
Device” menu is used in both the Config Inputs and Config Outputs sections to determine which device is to be
affected. The process of selection is the same, but when the selection is complete, the result (that is, which
menu opens next) differs.
Main
Config
Global
Misc. [6]
Main
Config
Global
Misc. [7]
[MISC] 1:MultiAck(ON)
2:Reminder(ON)
Config
[OPTS] 3:WT Timeout(30m) 4:SupvMsg(ON)
[LCD] Number of Remote Displays (1)
[Annunc]
30 of 43
9000-0447
Technical Manuals Online! - http://www.tech-man.com
