FBII XL-20, Hookup And Installation Instructions

Page: 36 / 83

Section 9 - System Programming
9–3
Question 04, L2
CS Receiver Type
Default = 5
Enter the digit for the desired receiver type from the table below in location L2. NOTE: The
checkmarks highlight which options are selected.
FORMAT PULSE SPEED
HANDSHAKE
FREQUENCY Digit
10 PPS 20 PPS 40 PPS 1400 HZ 2300 HZ
PARITY TYPICAL CS RECEIVER
0
9 9
FBI, ADEMCO, SILENT KNIGHT
1
9 9
FBI
2
9 9
FBI
4
9 9
FBI, SILENT KNIGHT, ADCOR,
ADEMCO
5
9 9
FBI
6
9 9
FBI, RADIONICS
8
9 9 9
FBI, FRANKLIN, SESCOA, DCI,
VARITECH
9
9 9 9
FBI, RADIONICS
A
9 9 9
FBI
C
9 9 9
FBI
D
9 9 9
FBI
E
9 9 9
FBI, RADIONICS
NOTE: UL-compatible receivers are: FBI CP220 (all formats), ADEMCO 685, Silent Knight
8520, 9000, RADIONICS.
Question 04, L3
AC Line Frequency, Split Reporting & Pulse Type
Default = 1
Enter the digit for the desired message length from the table below in location L3. NOTE:
The checkmarks highlight which options are selected.
AC LINE FREQUENCY DIALING TYPE
Digit
50 HZ 60 HZ
SPLIT
REPORTING PULSE Touch Tone
0
9 9
1
9 9
2
9 9
3
9 9
4
9
CS DIALER DISABLE
6
9
CS DIALER DISABLE
8
9 9 9
9
9 9 9
A
9 9 9
B
9 9 9
Please consult your central station manager to determine the formats and message lengths that
are accepted by the receiver.
UL
European dialing format has not been tested by UL.
SPLIT REPORTING - The Split Reporting option will direct all opening and closing signals
to the secondary receiver telephone number. All other conditions (Alarms, Troubles, Restores
etc.) will adhere to the reporting route described in question 01. If Split Reporting is selected,
the secondary receiver telephone number MUST be programmed.
If Local Alarm is desired, no other options need to be disabled (telephone number,
CS codes).