– 4 –
Quick Reference (cont’d)
The following table lists the “Quick Commands” available with this
control
.
Keystroke
Quick Command
Keypads
Description
#
1
Quick Arm
All keypads
If system is ready, allows you to arm the system without
requiring your User Code. Your User Code is always
needed to disarm the system.
#
2
Force Arm
All keypads
Allows you to arm the system even if some zones are
faulted. These zones are automatically bypassed and are
unprotected.
[BYPASS] +
Zone No.
Quick Bypass
All keypads
Allows you to bypass a specific zone number. Must be
enabled by your installer.
#
3
Set Time
All keypads
Allows entry of the current system time (hours, minutes,
month, day, year).
#
4
Zone Directory
LCD only
Displays listing of zones in system.
#
55
Display Firmware Version
LCD only
Displays version of your OMNI-408 firmware.
#
56
Display Keyfob Battery Status
All keypads
Allows you to test battery status of your keyfob. Upon entry
of this mode, press any button on the keyfob and the keypad
will display if your battery is low.
#
58
Change/View Pager Number
All keypads
Allows you to redirect pager output to a different pager
number. Phone numbers are displayed only on LCD
keypads.
#
6
Display/Toggle Chime Mode
All keypads
Allows you to change the status of the chime function.
#
7
Display Current Time
LCD only
Allows you to view the current system time.
#
8
User Page Toggle
All keypads
Allows you to turn the pager mode on or off. Keypad
displays the current system status.
