System Operation (cont’d)
– 13 –
NOTE:
Bypassed zones are NOT protected when the system is turned
on. After the bypass command has been accepted, the keypad sounds
one long beep, and the following is displayed:
LCD Keypad:
BYPASSED: ZN1
FRONT DOOR
Fixed-Word Keypad:
BYPASS
zone number displayed
To Unbypass a Zone
Pressing the BYPASS button returns a bypassed zone to normal
operation. To unbypass a zone(s), repeat the bypass function as
follows:
BYPASS
followed by your User Code
†
and
Zone No. (1-8)
After unbypassing, the zone display shows the state of the zones.
†
If the Quick Bypass feature has been enabled by the installer, do not
enter the User Code when unbypassing zones.
Turning the System Off
When you turn the system off, you turn off only the burglar portion of
your system; any smoke or heat detectors and panic keys will remain
on. You must enter through a designated entry door and turn off the
system within the time allowed. You can have different amounts of
time for different entry points. See your system reference sheet for
the times established for your system.
To turn your system off:
Enter your User Code.
