System Operation (cont’d)
– 10 –
When the System is Not Ready
If the system is not ready to be armed, the READY LED is off and the
display indicates which zone or zones are not ready.
Determine which zone or zones are not ready, resolve the problem,
and turn the system on normally. If the problem cannot be resolved,
you may bypass the zone that is not ready. Bypassing should only be
done if the problem on the zone cannot be resolved, OR if you
intentionally wish to leave the zone off. For example, you would leave
the zone off if you plan to keep the window open for ventilation. Zones
that are bypassed are not protected when the system is on. Refer to
the paragraph entitled, “To Bypass a Zone” for a description of the
procedure.
To Turn the System On and Stay Inside
To turn the perimeter portion of your burglar alarm on and move
around freely inside the premises, use the STAY mode.
Check to make sure the system is ready. When it is ready, press:
STAY
followed by your User Code.
When the system has been turned on successfully, the ARMED LED is
on, and the following is displayed:
LCD Keypad:
ON: STAY
Fixed-Word Keypad:
STAY
REMEMBER:
You must turn the system off if you want to open the
door or leave the premises after the exit time has passed.
