FAZUA RIDE 60, Original Instructions Manual

Page: 70 / 96

English | Original instructiOns
70
14 TECHNICAL DATA ON THE DRIVE UNIT
Article number
→
10A101000A/10A101100A
Continuous rated power
→
250 W
(Mechanical) power, max.
→
450 W
Nominal voltage
→
43.2 V
Support torque, max.
→
60 Nm
Pedaling cadence (range)
→
55–125 rpm
Protection type
→
IP54
Weight, approx.
→
4.3 lbs (1.95 kg)
Operating temperature
→
23 °F to 113 °F (-5 °C to +45 °C)
(ambient temperature)
Storage temperature (< 1 month)*
→
5 °F to 140 °F (-15 °C to +60 °C)
15 CORRECT POSITION OF SPEED SENSOR AND MAGNET
For the drive system to function correctly, the speed sensor and magnet
[A.2] must be mounted in the correct position on the rear wheel. If this
is not the case or if the speed sensor is not connected correctly, the
drive system will operate in "Soft Fault" mode.
You can find detailed information here
→
in Chapter 20.1 “E-bike status”.
→
If you find that the drive system is in "Soft Fault" mode, make sure the Speed
Sensor and magnet are correctly located in their holder on the rear wheel.
→
If the problem cannot be solved, do not use the e-bike but contact an autho-
rized specialist.
* The specification only applies if your e-bike is equipped with a removable battery and you have removed the
battery before storage (See Chapter 23 “Function and model variants of the battery”).