evation |
EN-22
4.1.2
Inserting the drivepack into the e-bike
More detailed information can be found
→
in chapter
15
.
1
“Inserting the drivepack into
the e-bike”.
1. Position the drivepack with the interface for the bottom bracket onto
the corresponding interface on the bottom bracket.
2. Swing the upper end of the drivepack into the downtube of the e-bike.
The drivepack is automatically locked in place when the two interfaces
on the drivepack and bottom bracket are correctly interlocked and the
drivepack is completely swivelled into the corresponding mount on the
downtube.
B
A
B
A
3. Check that the drivepack is securely fitted.
If the drivepack does not lock, repeat the procedure. Do not use the
drive system if the drivepack cannot be locked to the e-bike.
FAZUA Benutzerhandbuch_EN.indb 22
FAZUA Benutzerhandbuch_EN.indb 22
26-Feb-20 12:47:04
26-Feb-20 12:47:04
- 32 -