Fayat DYNAPAC F1800C, Operation & Maintenance Manual

Page: 304 / 330

F 90.18 4
Central lubrication system
Check filling level
A
The lubricant tank should always be
filled sufficiently so that the system can-
not "run dry", ensuring sufficient drive
chain lubrication and eliminating the
need for time-consuming bleeding of
the system.
- Always maintain a fill level above the
"MIN" mark (A) on the tank.
Top up lubricant tank
- A filler hose (B) is located on the lubricant tank (A) for filling purposes.
- Connect the grease gun (C) included with the scope of supply to the filler hose (B)
and fill the lubricant tank (A) up to the MAX mark.
Alternatively, the lubricant tank can be filled with a standard grease gun at the lu-
bricating nipple (D).
A
When the lubricant tank is completely empty, the pump may have to run for up to 10
minutes until the full delivery rate is achieved after filling.
A
D
C
B
A