Fayat DYNAPAC DRP20D, Operating Instruction, Page: 87 / 102

5. Unscrew the bleeding screw and collect any oil running out.
6. Screw in the bleeding screw.
7. Clean the area around the oil level inspection plug and
unscrew the plug.
8. Place a cloth underneath the filler bore to collect leaking oil.
NOTICE!
Components may get damaged!
– Use only oil of the permitted specification.
9. Fill in oil through the filler bore, until it starts to run out
through the level inspection bore.
10. Slacken the bleeding screw.
11. Wait until all air has escaped and then tighten the bleeding
screw.
B-692-0072
Fig. 95
B-695-0013
Fig. 96
HV 32
B-695-0017
Fig. 97
B-692-0072
Fig. 98
Maintenance – Every 2 years/every 500 operating hours
DRP20D 87