Fayat DYNAPAC DRP20D, Operating Instruction, Page: 73 / 102

8.8 Annually
8.8.1 Changing the engine oil and cleaning the oil filter
Change the engine oil at the latest after 250 oper-
ating hours.
NOTICE!
Danger of engine damage!
– Change the oil only with the engine at oper-
ating temperature.
– Use only oil of the permitted specification
Ä
Chapter 8.3.1 ‘Engine oil’ on page 64 .
– Filling quantity: Ä Chapter 8.4 ‘List of fuels and
lubricants’ on page 67
Protective equipment: n Working clothes
n Protective gloves
n
Safety goggles
1. Park the machine in secured condition Ä Chapter 6.4
‘Parking the machine in secured condition’ on page 53 .
2. Clean the area around the dipstick and pull the dipstick out.
3. Clean the area around the drain plug.
4.
WARNING!
Danger of burning on hot components!
– Wear your personal protective equipment
(protective gloves, protective clothing).
– Avoid touching hot components.
Unscrew the oil drain plug (2) with the seal ring (1) and catch
any oil running out.
5. Clean the drain plug and screw it back in with a new seal
ring, Tightening torque: 20 Nm (15 ft
·
lbf).
6. Loosen the screw (1) for approx. five turns and pull the oil
filter (2) out of the housing.
Draining off engine oil
Fig. 56
Cleaning the oil filter
Fig. 57
Maintenance – Annually
DRP20D 73