Fayat Dynapac DFP11, Operating Instructions Manual, Page: 90 / 112

6. Install the new V-belt and pull the engine carrier back.
7. Tighten the fastening screws (1) on both sides.
8. Check tension of V-belt, tighten if necessary.
ð
Compression measurement: 5 - 10 mm (0.2 - 0.4 in).
9. Assemble the V-belt guard (1) with fastening screws (2).
10. Check the V-belt tension again after 25 operating hours,
tighten if necessary.
8.8.4.1 Checking the frequency of the base plate
Keep feet and hands clear of the vibrating base plate.
CAUTION!
Danger of injury caused by uncontrolled
machine movement!
– Always hold on to a running machine.
– Always keep an eye on a running machine.
1
B-230-0030
Fig. 86
Fig. 87
2
1
B-230-0072
Fig. 88
Maintenance – Annually
DFP11 90