8.9.6 Cleaning the water spraying system
Protective equipment:
n
Working clothes
n
Protective gloves
1.
Park the machine in secured condition
‘Parking the machine in secured condition’ on page 62
2.
Remove the cap (1) from the water tank.
3.
Remove the rubber caps (3) from the spray tube.
4.
Open shut-off valve (2) and drain off all water.
5.
Flush the water tank with a strong water jet, until all dirt has
run out.
6.
Plug the rubber caps back on the spray tube.
7.
Fill the water tank with clean water and close the cap.
8.9.7 Measures prior to extended shut-down period
8.9.7.1
Measures before shutting down
DANGER!
Danger to life caused by explosive gas-air
mixes!
–
Do not allow gasoline to come into contact with
hot components.
–
Smoking and open fire is prohibited.
–
Keep away from heat sources, sparks and
other sources of ignition.
–
Do not spill any gasoline.
If the machine is shut down for a longer period of time, e.g. winter
season, the following work must be carried out.
Depending on weather influences these conservation measures
will protect the machine for approx. 6 to 12 months.
1.
Park the machine safely
Chapter 6.5 ‘Parking the machine
in secured condition’ on page 62
2.
Allow the engine to cool down for at least 30 minutes.
3.
Clean the machine thoroughly.
4.
Change the engine oil
Chapter 8.7.1 ‘Changing the engine
.
5.
Use fuel stabilizer or empty the fuel tank completely.
1.
Mix fresh fuel with fuel stabilizer (follow the instructions of the
manufacturer).
2.
Empty the fuel tank and fill it with the prepared fuel mix.
Fig. 97
Using fuel stabilizer
Maintenance – As required
BVP 12/50 A
97
Go
to
to
order
your
parts
