3.
Loosen the fastening screw (2) and remove the V-belt guard
(1).
1.
Check condition and tension of the V-belt, tighten if neces-
sary.
ð
Compression measurement:
approx. 5 mm (0.2 in).
2.
Replace a damaged V-belt
Chapter 8.8.7 ‘Replacing the V-
.
1.
Slightly loosen the fastening screws (1) on both sides.
2.
Pull the engine back, until the correct V-belt tension is
reached.
3.
Tighten the fastening screws (1) on both sides.
Fig. 92
Checking the V-belt
Fig. 93
Tightening the V-belt
Fig. 94
Maintenance – As required
BVP 12/50 A
95
Go
to
Discount-Equipment.com
to
order
your
parts
