Operation
BOMAG
25
BT 60/4, BT 65/4
5.3
Adjusting the steering bow
Fig. 11
Note
i
The steering bow has three positions.
The steering bow can be adjusted to the height of
the operator by using the bore holes (2), (3) and
(4) (Fig. 11):
(2) lowest position
(3) middle position
(4) highest position
l
Loosen the screws (1) on both sides
l
Loosen the screws (4) on both sides and pull
them out.
l
Set the steering bow to the desired height.
l
Tighten screws (1) and (4) on both sides.
5.4
Starting the engine
Danger
!
Exhaust gases are highly dangerous!
Always ensure an adequate supply of fresh air
when starting and operating in closed rooms
and trenches!
Danger
!
Danger of accident!
Examine the starter rope of the recoil starter
for chafing before starting, replace if neces-
sary. A damaged rope can break and cause in-
juries during starting.
Always hold on to the machine.
Keep your feet away from the tamper plate, be-
cause the vibration starts immediately.
Always keep an eye on a running machine.
Danger
!
Loss of hearing!
Wear your personal noise protection means
(ear defenders) before starting operation.
Fig. 12
l
Set the engine stop switch (Fig. 12) to position
"ON".
540080
1
4
3
2
541035
Go
to
Discount-Equipment.com
to
order
your
parts
