3.
Remove dried dirt with a suitable brush from all cooling fins
and cooling air intake openings.
4.
CAUTION!
Danger of eye injuries caused by particles
flying around!
–
Wear your personal protective equipment
(safety gloves, protective working
clothes, goggles).
Blow out the cooling fins and cooling air intake openings with
compressed air.
5.
In case of damp or oily contamination you should consult our
customer service department.
8.9.3 Servicing the V-belt
Protective equipment:
n
Working clothes
n
Safety shoes
n
Protective gloves
1.
Park the machine safely
Chapter 6.5 ‘Parking the machine
in secured condition’ on page 56
2.
Allow the engine to cool down.
3.
Unscrew the V-belt guard (1).
4.
Check condition and tension of V-belt.
ð
Compression measurement:
5 - 15 mm (0.2 - 0.6 in).
5.
The V-belt cannot be re-tightened.
Replace the V-belt if it is damaged or if the compression
measurement is exceeded
Chapter 8.7.5 ‘Replacing the V-
.
Fig. 109
1
B-692-0151
Fig. 110
Fig. 111
Maintenance – As required
BPR 25/40 D
92
Go
to
Discount-Equipment.com
to
order
your
parts