manualshive.com logo in svg

Fayat BOMAG BPR 25/40 D, Operating And Maintenance Instruction Manual, Page: 72 / 103

Share
Download
Fayat BOMAG BPR 25/40 D Operating And Maintenance Instruction Manual Download Page 72

8.7  Annually

8.7.1  Changing the engine oil and cleaning the oil filter

Change the engine oil at the latest after 250 oper-

ating hours.

NOTICE!
Danger of engine damage!

–

Change the oil only with the engine at oper-

ating temperature.

–

Use only oil of the permitted specification

Ä

 Chapter 8.2.1 ‘Engine oil’ on page 65

.

–

Filling quantity: 

Ä

 Chapter 8.3 ‘List of fuels and

lubricants’ on page 68

Protective equipment:

n

Working clothes

n

Protective gloves

n

Safety goggles

1.

Park the machine in secured condition

 

Ä

 Chapter 6.5

‘Parking the machine in secured condition’ on page 56

.

2.

Clean the area around the dipstick and pull the dipstick out.

3.

Clean the area around the drain plug.

4.

WARNING!
Danger of burning on hot components!

–

Wear your personal protective equipment

(protective gloves, protective clothing).

–

Avoid touching hot components.

Unscrew the oil drain plug (2) with the seal ring (1) and catch

any oil running out.

5.

Clean the drain plug and screw it back in with a new seal

ring, Tightening torque: 20 Nm (15 ft

·

lbf).

Draining off engine oil

Fig.  62

Maintenance – Annually

 

BPR 25/40 D

 

74

Go 

to 

Discount-Equipment.com 

to 

order 

your 

parts

Summary of Contents for BOMAG BPR 25/40 D








































































































Reviews:

No comments