Fayat Group DYNAPAC DR6Xe, Operating And Maintenance Instructions Manual, Page: 61 / 88

7.2 Loading the machine
Loads may only be attached and hoisted by an expert/qualified
person.
Do not use lashing points that are damaged or impaired in any
way.
Only use lifting and lashing tackle with sufficient load-bearing
capacity for the weight to be loaded. Minimum load bearing
capacity of lifting tackle: see operating weight
Ä
Chapter 2 ‘Tech-
nical data’ on page 11 .
Always use appropriate lashing tackle at the lashing points.
Use lashing tackle only in the specified loading direction.
Lashing tackle must not be damaged by machine parts.
When lifting the machine, make sure the load does not move in
an uncontrolled way. If necessary, hold the load steady with guide
ropes.
Protective equipment: n Working clothes
n Safety shoes
n Protective gloves
1. Attach the lifting tackle to the dedicated lifting eye.
2.
DANGER!
Danger to life caused by suspended
loads!
– Do not step or stand under suspended
loads.
Lift the machine carefully and set down again at the intended
location.
3.
WARNING!
Danger of burning on hot components!
– Wear your personal protective equipment
(protective gloves, protective clothing).
– Avoid touching hot components.
Lay the machine on the rollers.
B-541-0186
Fig. 36
B-541-0187
Fig. 37
Loading / transporting the machine – Loading the machine
DR6Xe 61