Fayat Group DYNAPAC DR6Xe, Operating And Maintenance Instructions Manual, Page: 27 / 88

3.5 Loading/transporting the machine
Before loading and transporting the machine, check that the bat-
tery may remain in the machine in accordance with national regula-
tions.
If necessary,store the battery separately in the supplied and
approved original container. Observe national regulations for the
transport of dangerous goods!
Make sure that persons are not endangered by the machine tipping
or sliding off.
Do not use damaged lifting and lashing points or if impaired in any
other way.
Always use appropriate lashing tackle at the lashing points.
Use lashing tackle only in the specified loading direction.
Lashing tackle must not be damaged by machine parts.
Secure the machine on the transport vehicle against rolling, slip-
ping and turning over.
Protect the machine on transport vehicle with suitable means
(e.g. plastic tarpaulin) against the ingress of water and moisture.
Loads may only be attached and hoisted by an expert/qualified
person.
Only use lifting and lashing tackle with sufficient load-bearing
capacity for the weight to be loaded.
Fasten the lifting tackle only at the specified lifting points.
Danger to the life of persons if they step or stand under a sus-
pended load.
When lifting the machine, make sure the load does not move in
an uncontrolled way. If necessary, hold the load steady with guide
ropes.
Concerning your safety – Loading/transporting the machine
DR6Xe 27