Fayat Group DYNAPAC CA5000, Instruction Manual

Page: 83 / 170

Operation
4812158701_G.pdf 2019-10-01
Burnout of DPF filter - (IIIB/T4i)
The machine is equipped with a diesel particle filter
(DPF filter), and the engine performs an automatic
burnout of soot and ash if necessary.
The burnout is performed after 6-10 hours of
operation, depending on the operating mode.
3, 4
Fig. Control panel
1. Lamp
2. Switch for delayed burnout of DPF
filter
3. High exhaust temperature
4. Delayed burnout
1
4 3
2
The free space above the roller must not be less
than the height of the cab. Temperatures in the
region of 350°C (662°F) can be generated at the
exhaust pipe when performing burnout of the DPF
filter. The free space above the roller must not be less
than the height of the cab. Temperatures in the
region of 350°C (662°F) can be generated at the
exhaust pipe when performing burnout of the DPF
filter.
When burnout starts, the yellow lamp (1) lights
continuously and then goes out after 2 min.
The burnout of the DPF filter lasts for approx. 30
minutes, and the machine can be operated as normal
or be allowed to idle during this time.
An image indicating high exhaust temperature (3) is
displayed when burnout starts (pop-up), and goes out
after 10 seconds. An indication (3) in the display's
status field is shown throughout the period when the
engine is performing burnout.
If it is not appropriate to allow the machine to perform
automatic burnout, perhaps because the machine is in
an unsuitable location or the prevailing working
conditions do not permit this, it is possible to delay
burnout by activating delayed burnout.
The switch for delaying burnout (2) must be pressed
for 3 seconds to delay filter burnout for 20 minutes.
An image indicating delayed burnout (4) is now
instead shown in the display picture.
DPF displays
Display symbol Sound Soot
level Comment "Yellow
warning" Display symbol Sound Soot
level Comment "Yellow
warning"
Beep <100% Press and hold the delay switch for 3 sec. to
delay burnout by 20 min.
Deactivated automatically when the machine
is restarted.
-
Beep <100% Press and hold the delay switch for 3 sec. to
delay burnout by 20 min.
Deactivated automatically when the machine
is restarted.
-
100% -
<114% 0.5Hz 100% -
<114% 0.5Hz
71