Revision History
08/01/2023
4812325556EN
67
Check operation of the emergency brake
Make the machine move slowly. Hold the steering wheel and
brace yourself for a sudden stop.
Press the emergency brake button (1). The roller will stop
abruptly and the engine will shut down
.
After testing the brakes, put the lever forward / reverse to
neutral and activate the parking brake (2).
Pull the emergency brake button out. Start the engine
The roller is now ready to work.
Check the engine oil level
The oil dipstick is located under the oil filler plug on the left side
of the engine.
Never operate the machine with the oil level
below the L mark and above the mark H. Low
performance or engine damage may occur.
Place the machine on a flat surface, wait at least 15 minutes
after switching off the machine, and make sure the level is
between the marks H (high) and L (low).
Check the level of engine coolant
The expansion tank is located in the upper left corner of the
engine access.
Make sure the cooling liquid level is between the MAX and MIN
marks the expansion tank. If necessary, remove the tank lid and
complete the level
.
NEVER open the lid of the expansion tank when
the engine is hot and always wear gloves and
goggles.
When filling the cooling liquid, always use a compound with
50% water and 50 % additive. See the specifications of
lubricants in this manual.
Fig.
– Engine oil level
Fig.
– Emergency brake
1.
Emergency brake
2.
Parking brake
2
Fig.
– Expansion tank
1. Maximum
2. Minimum
1