Operation
38
4812325556EN
08/01/2023
Operating the roller
Under no circumstances the machine shall be
operated away from the ground. The operator
shall be seated inside the machine during the
operation.
Make sure the areas at the front and behind the
machine are free.
•
Place the desired engine RPM by pressing buttons 1 and 4
(+ and -) the lights will indicate the selected RPM.
Auto idling is the function that slow the engine RPM
whenever the joystick is in neutral position for 10
seconds, designed to reduce fuel consumption and
noise. Whenever you change joystick position it
goes back to the previous selected RPM
automatically.
•
Place the desired work speed (Turtle/Rabbit) (6).
•
Make sure the steering is working normally by turning the
steering wheel to the left and to the right once with the roller
stationary.
•
When compacting asphalts, do not forget to activate the
sprinkler system
•
Gently push the lever Front / Back (5) to either direction,
depending on which one you want to go
.
Release the parking brake button (7) by sliding
the red lock on the button backwards and
changing the lever position. Remember that the
machine can roll if you are on a slope.
Make sure the parking brake (7) is working
correctly by activating it and moving the
forward/backward lever (5) to the F or R position.
Keep the brake test button pressed. This way,
when you throttle the machine, it will not move.
Fig.
– RPM Selection
1.
Idle - 900RPM
2.
Low - 1400RPM
3.
High - 2250RPM
1
3
2
Fig.
– Side panel
5. Forward/reverse lever
6. Low speed
7. Parking brake
6
5
7