![Fayat Group BOMAG BM 500/15 Service Manual Download Page 26](http://html1.mh-extra.com/html/fayat-group/bomag-bm-500-15/bomag-bm-500-15_service-manual_4599112026.webp)
Always keep the machine horizontal when driving into or out of the
milling track.
Make sure that no overhangs protrude into the public traffic.
Ensure a sufficient distance to the ceiling when driving into a
building.
Always keep a sufficient distance when passing through subways,
under bridges, tunnels, electric power lines etc. and when entering
into or driving out of buildings.
If the machine has contacted high-voltage power lines:
n
do not leave the operator’s stand,
n
warn others from coming close to or touching the machine,
n
if possible drive the machine out of the danger zone
n
have the power switched off.
Operate the machine only from the operator’s stand.
If possible operate the machine while seated.
If standing up is required be extremely cautious. Danger of falling
off!
Always move the arm console to the required position.
Match the speed to the working conditions.
Switch the lights on if the visibility is poor.
Do not climb onto or off the machine while the machine is driving.
Change the travel direction only at standstill.
Do not use the machine to transport persons.
In case of unusual noises and development of smoke perform
trouble shooting and have the fault corrected.
Always keep a safe distance to excavation pit edges and embank-
ments
Refrain from any work that could adversely affect the stability of the
machine.
Do not drive on unstable hard shoulders, danger of tipping over.
Check the load bearing capacity before driving over bridges, cellar
roofs, vaults or similar.
Leave the machine in case of thunderstorms, danger of lightning!
1.2.7.3 Driving on gradients and slopes
Do not drive on gradients exceeding the maximum gradability of
Chapter 2 „Technical data“ on page 63
.
Drive extremely carefully on gradients and always directly up or
down the slope.
Soil conditions and weather influences impair the gradability of the
machine.
Wet and loose soils considerably reduce ground adhesion of the
machine on gradients and slopes. Higher risk of accident!
General – Concerning your safety
BM 500/15
26
Summary of Contents for BOMAG BM 500/15
Page 2: ...2 Find manuals at https best manuals com...
Page 8: ...Table of contents BM 500 15 8 Find manuals at https best manuals com...
Page 9: ...1 General General BM 500 15 9 Find manuals at https best manuals com...
Page 41: ...This as a preview PDF file from best manuals com Download full PDF manual at best manuals com...