TOLERANCES FOR W
ATCH MOVEMENTS
RAIDER HARPOON
RECOMMENDA
TIONS FOR CARE AND MAINTENANCE
8
RAIDER HARPOON
MECHANICAL MOVEMENTS
The precision of a mechanical movement
varies depending on the habits of the person
TOLERANCES FOR WATCH MOVEMENTS
RECOMMENDATIONS FOR CARE AND MAINTENANCE
Your Favre-Leuba watch is a precision
instrument of the highest quality. In order to
ensure that it continues to work perfectly
over many years, we advise you to observe
the following recommendations concerning
maintenance and service intervals.
• Do not put your watch on any devices
that generate magnetic fields, such as
loudspeakers or refrigerators. These
magnetic fields can damage your watch.
• Always rinse your watch with fresh water
after contact with sea or chlorinated water.
Allow leather straps to dry in the air, never
on any heating devices.
• As a precaution, avoid thermal and other
shocks.
• Always lock the crown carefully. This is
the only way to ensure that no water can
penetrate the case and the movement.
CARE INSTRUCTIONS
who is wearing the watch. The accuracy of
a mechanical watch from Favre-Leuba is
usually between 0 and +14 seconds a day.
• Clean metallic straps and water-resistant
cases with a toothbrush and soapy water.
Use a soft cloth for drying.
• Note that chemical products such as
solvents and detergents, perfume and
cosmetics can damage the strap, case or
seals.
• Avoid exposing your watch to extreme
temperatures (over 60°C or 140°F and
under 0°C or 32°F) and to large tempe r-
ature fluctuations.
• Never use chronograph buttons under
water, otherwise water may penetrate the
case and thus the movement.
All watches from Favre-Leuba are water-
resistant and can withstand water pressure
of at least 10 bar (depth of 100 meters).
The details of the water-resistance of your
Favre-Leuba watch is engraved into the base
of the case. The absolute water-resistance
of a watch is not permanent and can be
affected by ageing of the seals or by impacts
WATER-RESISTANCE
on the crown. We therefore recommend
that you have the water-resistance of your
watch checked annually or after exposure
to unusual stress. This check must also be
carried out after opening the watch and after
servicing. In order to comply with the terms of
the warranty, this check must be carried out
by an authorized Favre-Leuba service center
or an authorized Favre-Leuba retailer.
