FAVORIT 12K SUPER INV NORDIC, User Manual

Page: 175 / 192

27
the button.
• Your air conditioner will start running
again in the mode you selected last.
• Press until symbol at the
display screen of your remote is acti-
vated.
• After selecting the heating mode, with
and buttons, you may adjust the
environment temperature between
16–30º according to your comfort
need.
• Every time you press the buttons,
temperature increases or decreases
1°C. The highest temperature at the
heating mode is 30°C.
• In the heating mode, you can adjust
the fan speed with the button, and
the direction of vertical and horizontal
air flow with the and buttons.
You may change the mode at any time you
want.
ECO
(Energy Saving)
Func-
tion
You can activate this function by press-
ing (
(2 sec.)
) for two seconds. When
the ECO function is enabled the energy
consumption decreases up to 30% in the
cooling and heating modes depending on
the model. When the ECO function is en-
abled, the temperature adjustment interval
of your remote control will be automatical-
ly between 23-28 °C in the cooling mode.
There will be no temperature adjustment
lower than 23 °C for the cooling mode
and higher than 24 °C for the heating
mode When you press the button, the
icon will be displayed on the remote
control display.
• After the ECO mode is enabled, if
any mode switch is made, the ECO
function will be disabled. It should be
adjusted again when necessary.
• The ECO function can be set for the
cooling and heating modes. To cancel
the function, press again.
• You may operate the sleep function
when the ECO function is enabled.
In this case, due to the ECO function,
there will be some limitations in the
adjustable temperature interval.
• When both the sleep mode and the
ECO function are active, you may
cancel the Sleep mode or the ECO
function any time you wish.
WARNING: When the ECO function is
active, the air conditioner's capacity may
fall.
Indoor Unit Display Light
Function
If you want, you can turn off the light of
the indoor unit with the V button. When
you turn on the air conditioner again, the
screen light will be on. When you press
any button on the remote control, the
screen turns on automatically and turns
off shortly.
Horizontal Fin Function
You can adjust the direction of the air
blown out by the indoor unit of your air
conditioner vertically by pressing the
button. Every time you press the button,
the position of the fin changes. The hori-
zontal fin may be adjusted in 5 different
positions. If you continue to press the but-
ton, horizontal fins start to move up and
down automatically. If you press the button
one more time, the movement will stop.