FAVI Rio HD, User Manual

Page: 5 / 13

R I O H D
2 2 2 2
Power Supply
110V-120V or 210V-240V
Accessories Spare IllumiBright Lamp, Remote
Control, VGA Cable, Composite AV
Cable, Lens Cleaner Tissue, Power Cable
Safety
Please read below before operating:
•
Do not look directly into the lens or open the case while the projector is
running. This could cause severe injury to your eyes.
•
Please keep the projector away from liquids. This could cause electric
shock and damage your projector.
•
Do not attempt to change the lamp while the projector is running or soon
after it has been turned off. If you need to change the lamp please consult
the “Lamp Replacement” section at the end of this user guide.
•
After you turn off the projector please wait 15 minutes before turning it
back on. Failing to wait 15 minutes will decrease the life of the lamp and
the projector.
•
Please only use the unit or remote power button to turn off the projector.
Do not unplug the unit while it’s running or turn the unit off using the
main power switch. This will cause severe damage to the lamp and the
projector.
•
Do not cover any of the projector vents.
•
There are protective circuits and alarming devices located inside the
projector. When the internal temperature rises caused by an improper
environment or blocked vents, the projector will automatically shut down.
We strongly recommend you keep the projector in a cool room. This will
prolong the overall life of the projector.
•
Please keep the projector where the temperature does not exceed 85 °F
(29.4 °C). The LCD inside the projector will develop black spots if left in
warm environments. This heat damage will not be covered under
warranty.