FAVI A3-WiFi User Guide
FAVI Entertainment
6
Powering the Projector ON and OFF
Before first use, connect the DC power adapter and allow the projector to fully charge.
Powering ON the projector:
Slide and hold the power switch for a few seconds. You will hear the projector’s cooling fan spin up and
an image will start projecting as the projector loads the Android Operating System. After a few moments,
you will see the desktop as shown below and your projector will be ready to use.
Powering OFF the projector:
Sliding then letting go of the power switch will cause the projector to enter suspend mode. In suspend
mode, the projector in hibernating and any software that was running will still be active. Slide and hold
the switch to bring up the “Device Options” as shown below.
Here you can either suspend or power off the projector.