Service Client FAVEX : 09.69.36.56.60
11
11.
Do not
wrap the power cable around the electric heater.
12.
T
he device must be moved with caution, avoiding shocks and collision.
13.
I
f the device is damaged, it must be repaired by a professional.
14.
I
f the power cable becomes damaged, it must be replaced by an authorised
agent or qualified person to avoid any danger.
15.
T
his device is for household use only.
16.
N
ot recommended for use on construction sites or any place containing
flammable materials.
17.
T
he device reaches high temperatures when in use. Disconnect the device and
wait for it to cool down before cleaning.
18.
Do not
use the device in the presence of dangerous gases in the air.
19.
Do not
use the device to dry towels or clothes.
20.
Do not
use the device as part of a sauna.
21.
Do not
immerse the device in water when cleaning.
22.
T
he device must be plugged in to a visible socket with easy access.
23.
O
ne or two black spots may appear on the surface of the heating unit in the first
few minutes after being switched on. This is normal and should not affect the
performance of the device.
24.
A
tilt switch is located inside the device for safety purposes, in the event the device
is dropped or falls.
25.
ATTENTION:
This device is not equipped with an external temperature control
system
26.
D
o not place the device immediately above or below an electrical outlet.
27.
T
he various ignition positions must be visible from a distance of 1 metre.
28.
T
he marking concerning the covering of the device must be visible after installation
of the patio heater.
T
he marking must not be affixed to the back of the heater.
29.
T
he device must be installed at a distance of 100 cm from the wall.
30.
T
he device must be installed according to the operating instructions.
31.
D
uring assembly, keep the device away from all heat sources and flammable
materials.
32.
C
hildren must be supervised by an adult when using the device.
33.
ATTENTION:
To avoid overheating, do not cover the device during use!
34.
I
f the heater is covered or poorly positioned, thus representing a fire hazard, do
not use a programmer, timer, remote-control system or any other device that
switches on the heater.
35.
W
ait for the device to completely cool after switching off before covering.
36.
ATTENTION:
Do not use the heater with a programmer, timer or any other
device that switches on the heater automatically.
37.
ATTENTION:
In order to avoid any danger resulting from the untimely reset
of the thermal overload protection system, the device must not be run off an
external switch, such as a timer, or connected to a circuit regularly powered on
and off by the electricity provider.
GB
