background image

4

FAVERO Electronics

 - 0259-0902A Assioma user manual _Rev21 - EN-IT-DE

ENGLISH

4.  Warnings

Please carefully read this manual and the safety instructions before installing 

the product. An incorrect installation may lead to accidents and possible 

damage to things and/or injury to people.

If you have any doubts about your ability to install the product, we recommend 

you to ask for the assistance of a specialized mechanic. An incorrect installation 

may cause or result in irreparable damage to the product which shall not be 

covered by the warranty. Before starting to ride, check that the force necessary 

to release your shoe from the pedal is suitable. 

Visit the YouTube channel: 

Favero Cycling

 to see the detailed video installation.

https://www.youtube.com/Favero_cycling

5.  Switching on assioma

assioma

 will automatically switch on by turning the pedals or starting to ride and will 

automatically switch off after 5 minutes of inactivity.

When using 

assioma

 for the first time, connect it to the supplied battery charger 

for a few seconds to switch it on. Follow the same procedure if “

Travel mode

” 

has been activated from the Favero Assioma app

.

If the LEDs do not blink, charge the battery as indicated in 

Chap. 12

.

For LED behavior read 

Chap. 18.

6.  activating assioma

assioma

 

must be activated to measure the power and cadence. If it is not activated, 

such measuring will not be performed. The activation also determines the start of the 

warranty period, allows updating the software and sending diagnostic reports to 

check the correct operation of the product.
Activation is obtained with the specific “

Favero

 

assioma

 app, available both for iOS 

and Android. The app can be downloaded free of charge.

Make sure that your smartphone is compatible with the Bluetooth v4.0 

 

standard or later versions, and that your internet connections is active.

Open the app and follow the instructions to perform the search, the connection to your 

device and the activation. If 

assioma

 does not appear in the search section, make sure 

that it is not already connected via Bluetooth to another device (e.g. bike computer).
For more information, read the FAQs on the website: cycling.favero.com

.

Summary of Contents for 772-01



















Reviews: